Code-verified technical guides connecting ASME, API, and ISO standards to live FieldEngineersKit calculators for piping, mechanical, and procurement workflows.
Free NC calculator path — ANSI/ASA S12.2 octave-band tangent Noise Criterion rating, ASHRAE space Pass/Fail, and FEK Control Room NC-35 worked example.
Bolt tension calculation for B16.5 flanges — preload F = σ_b·A_s, nut factor K, T = K·D·F, and FEK PCC-1 moly table screening with Round 1–4 passes.
Calculate pipe insulation thickness, jacket surface temperature, and linear heat loss with ASTM C680 / ISO 12241 screening and ASTM C1055 60 °C Pass checks.
Pipe support span screening with ASME B31.3 dead-weight beam theory, B31.1 Table 121.5–style chart spans, and FEK water-filled NPS 2–12 worked checks.
NPSHa calculation and suction-line friction for centrifugal pumps — HI 9.6.1 / API 610 screening with a FEK water flooded worked example (NPSHa ≈ 12.29 m).
End-to-end piping spool fabrication workflow: ASME B36.10M schedule lookup, B31.3 wall thickness, fit-up clearance, and hydrotest—aligned to FieldEngineersKit.
ASME B31.3 Para. 345 hydrostatic and pneumatic test pressure with St/S ratio, yield-limit screening, and a FEK-verified A106 Gr.B worked example (Pt≈3.25 MPa).
Free valve sizing calculator path for ISA-75.01.01 liquid US Cv — FEK-verified cooling-water example (Cv≈87.7), catalog Cv,sel headroom, then F_L cavitation in the sister tool.
SS 316 density (8.00 g/cm³) and stainless pipe/plate weight — FEK catalog ρ for 304/316/Duplex/Inconel with B36 geometry for MTO screening.
ASME B16.20 spiral-wound and RTJ gasket dimensions (ID, SE_OD, OR_OD, ring numbers) for B16.5 flanges — then m·y seating in the gasket-stress calculator.
Calculate ASME B31.3 / UG-34 blind flange and spectacle blind thickness with C = 0.30, corrosion allowance, and a worked NPS 10 Class 300 example aligned to FEK.
Master ASME B16.5 flange pressure-temperature ratings. Learn how temperature derating affects MAWP across Class 150 to 2500 for Carbon and Stainless Steel.
Link-Seal® pipe penetration sleeve guide: annular clearance, LS model selection, and link count — FEK screening with GPT chart confirmation required.
ASME B31.3 Table A-1 allowable stress derating and Table 304.1.1 Y-factor for CS, SS, and Cr–Mo — why falling S (not Y) drives hot-line schedule jumps.
ASME PCC-1 flange bolt torque patterns and sequences — star/cross order, 12- and 20-bolt examples, pass protocol, and nut-factor screening with FEK tools.
Field guide to pipe pressure drop: Darcy–Weisbach ΔP, Haaland friction factor, Crane TP-410 L/D, and API RP 14E erosion — FEK NPS 6 Sch 40 example.
6 inch flange OD in mm and ASME B16.5 flange dimensions — Class 150 OD 280 mm, Class 300 OD 320 mm, PCD, bolting, and mated-pair weight for FEK.
Master ASME B31.3 thermal expansion calculations and guided-cantilever loop sizing. Learn formulas, guide spacing rules, material limits, and worked field examples.
ASME B36 pipe schedule dimensions — Schedule 160 walls, OD/ID/W_m lookup, STD vs Sch 40 traps, and a verified NPS 8 Sch 80 worked example for FEK.
ASME B31.3 Para. 304.1.2 pipe wall thickness: corrosion allowance, 12.5% mill under-tolerance, and a worked NPS 6 example through schedule selection.
FieldEngineersKit